Standard Bench

Removal


1. Disconnect wiring, if equipped.


2. Remove screws and nuts (one of each on each side) retaining front seat track to front floor pan.


3. Lift the seat and track assembly out of the vehicle.



Installation


1. Apply Caulking Cord D6AZ-1 9560-A (ESB-M4G32-A) or equivalent around front seat track assembly attaching screw and stud locations on front floor pan.


2. Position front seat and front seat tracks into vehicle, secure to front floor pan with the retaining screws and nuts. Tighten the screws to 34-46 N-m (25-34 ft-lb).


3. Connect wiring, if equipped.