E8 Check Fluid Level Switch

- Key OFF.

Fluid Level Switch Connector:

- With the fluid level switch harness connector disconnected, jumper between Circuits 512(T/LG) and 531(DG/Y).

- Key ON.

- Does the red BRAKE light turn on?

YES -- Locate and service short to ground in Circuit 512(T/LG). Reconnect all loose connections. Repeat E1. [1][2]E1 - Pull Code

NO -- Replace brake master cylinder reservoir. Perform brake bleeding procedures. Reconnect all loose connections. Repeat E1. [1][2]E1 - Pull Code