Front Center Position Seat Belt

SPECIAL SERVICE TOOL REQUIRED
Seat Belt Bolt Bit # 50 Torx, C771-2100-A

REMOVAL

F-150 - 350 Regular Cab W/Front Bench Seat Shown, F-350 Crew Cab/Bronco Similar:

F-Series SuperCab With Bucket/Captain's Chair Shown, F-Series/Bronco Similar:

REMOVAL
1. Using Seat Belt Bolt Bit # 50 Torx T77L-2100-A, remove anchor bolts from rear floor.
2. Remove front seat center passenger belt.

INSTALLATION
1. For installation follow the removal procedures in reverse order.
2. Check sealer around floor anchor holes and add Ford Caulking Cord D6AZ-19560-A (ESB-M4G32-A), if necessary.
3. Tighten anchor bolts to 30-40 Nm (22-30 ft lbs).
4. Check front seat center passenger belt operation.