Rear Inboard Center Seat Belt

SPECIAL SERVICE TOOL REQUIRED
Seat Belt Bolt Bit # 50 Torx, C771-2100-A

REMOVAL






1. Using Seat Belt Bolt Bit # 50 Torx T77L-2100-A, remove anchor bolts from rear floor.
2. Remove damaged or distorted rear seat center belt.

INSTALLATION
1. For Installation, follow removal procedures in reverse order.
2. Check sealer around floor anchor holes and add Ford Caulking Cord D6AZ-19560-A (ESB-M4G32-A) if necessary.
3. Tighten anchor bolts to 30-40 Nm (22-30 ft lbs).
4. Check rear seat center belt operation.