Headlamp: Service and Repair

REMOVAL
1. Remove two screws and two nuts retaining headlamp door.
2. Pull headlamp door from vehicle. Remove three bulbs and sockets.
3. Disconnect engine control sensor wiring from headlamp bulb.
4. Remove two retainers attaching upper two attachments of headlamp.
5. Turn horizontal headlamp adjusting screw completely out of the adjusting nut.
6. Pull headlamp from vehicle.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten screws to 1.4-2.3 N.m (13-20 Lb-in). Tighten nuts to 4-7 N.m (36-61 Lb-In).
3. Check headlamp aim.