Glove Compartment: Service and Repair

REMOVAL
1. Depress right and left tabs on side of glove compartment door finish panel and rotate the door and bin assembly until the keeper feature engages, holding the assembly in the open and fully down position.

NOTE: If the door and bin assembly is forcibly removed from the hinges, the keeper feature located on the back side of each hinge is designed to break away without harming normal operation.






2. If necessary to remove the complete door and bin assembly, pull down and out on the door and bin assembly. Wedge and rotate the blade of a flat-head screwdriver between each hinge and tension tab.
3. Remove assembly.

INSTALLATION
1. Position bottom of door assembly on instrument panel.
2. Rotate door assembly to a closed position. Right and left tabs should be in the opening stop position.