Cruise Control Servo: Service and Repair

1. Disconnect battery cables, then remove battery and battery tray.
2. Remove two speed control bracket attaching screws.
3. Disconnect speed control 10-way electrical connector.
4. Depress accelerator pedal, then push locking arm on actuator assembly cap and rotate cap counterclockwise.
5. Remove ball slug from servo rotor by gently prying up arm slightly with small screwdriver while pushing ball slug out of servo rotor slot.

CAUTION: Bending the arm excessively will cause it to break. DO NOT USE servos with damaged or missing lock arms.

6. Reverse procedure to install.