With Rear Three or Four Passenger Quick Release Bench Seat

Safety Belt Bolt Bit:

Special Tool(s)

REMOVAL






1. Remove the detachable safety belt anchor buckle end, if so equipped.
1 Use the Safety Belt Bolt Bit to remove the detachable safety belt anchor buckle end bolt.
2 Remove the detachable safety belt anchor buckle end.






2. Remove the safety belt assembly from the left and right stanchions.
1 Use the Safety Belt Bolt Bit to remove the safety belt anchor bolt from the stanchion.
2 Remove the safety belt assembly.






3. Remove the left and right stanchions from the seat.
1 Remove the upper and lower bolts.
2 Remove the stanchions from the seat.

NOTE: When removing the stanchions, note their locations on the seat cushion frame and install them in the same location.






4. Use the Safety Belt Bolt Bit to remove the center safety belt bolt and washer from the rear seat cushion frame and remove the center safety belt (four-passenger bench seat only).






5. Remove the rear seat cushion cover from the seat back bracket.
1 Remove the plastic seat cushion cover fastener.
2 Peel back the rear seat cushion cover to expose the seat back bolts on the seat back bracket.

NOTE: Examine the seat cushion cover plastic fastener and replace if worn.






6. Remove the bolts from the rear seat cushion frame and remove the seat back.

INSTALLATION





















1. Follow the removal procedure in reverse order.