Standard A/C

REMOVAL
1. Using proper procedures, recover the refrigerant.
2. Disconnect the battery ground cable.
3. Remove the engine Air Cleaner (ACL) and the air cleaner outlet tube.







4. Disconnect the condenser core refrigerant lines.
1. Disconnect the compressor discharge line.
2. Disconnect the condenser to evaporator tube.

CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.







5. Disconnect the A/C evaporator core fitting.
1. Remove the screw.
2. Disconnect the A/C evaporator core fitting.

CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.

6. Remove the condenser to evaporator tube.

INSTALLATION
1. Service the replacement condenser to evaporator tube with the proper amount of Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B.
2. Route the condenser to evaporator tube.







3. Connect the A/C evaporator core fitting.
1. Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install the O-rings.
2. Connect the A/C evaporator core fitting.
3. Install the screw.

CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.







4. Connect the condenser core refrigerant lines.
1. Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install the O-rings.
2. Connect the condenser to evaporator tube.
3. Connect the compressor discharge line.

CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.

5. Install the engine air cleaner and the air cleaner outlet tube.
6. Reconnect the battery ground cable.
7. Using proper procedures, evacuate and charge the A/C system. Evacuation and Charging