Component Locations

NOTE: There are TWO diagnostic test connectors in this system. Ford uses varying terminology for these connectors but you can identify them by connector number and by location.

- The first test connector is the black RABS Diagnostic Test Connector C208. This primary test connector is used to retrieve and clear codes.

Instrument Panel Views:

The Rear Anti-Lock Brake System Diagnostic Connector C208 is located below RH side of instrument panel.

- The second test connector is the Differential Speed Sensor (DSS) Data Link Connector (DLC) C242. This connector is used only when instructed to by a procedure in a pinpoint test.






The Differential Speed Sensor (DSS) Data Link Connector (DLC) C242 is located at the left side of the instrument panel.