Crankshaft Main Bearing

GENERAL SPECIFICATIONS
Clearance - Crankshaft Journal to Main Bearing: 0.048-0.024 mm



TORQUE SPECIFICATIONS





^ Tighten the bolts in two stages in the sequence shown.
- Stage 1: Tighten to 37-43 Nm (27-32 ft. lbs.).
- Stage 2: Tighten an additional 85-95 degrees.





^ Install the side bolts and tighten in two stages, in the sequence shown.
- Stage 1: Tighten to 27-33 Nm(20-24 ft. lbs.).
- Stage 2: Tighten an additional 85-95 degrees.