Wiper Motor Linkage: Service and Repair

REMOVAL
1. Remove the windshield wiper pivot arms.

NOTE: The windshield wiper mounting arm and pivot shaft is replaced as an assembly.

2. Remove the cowl top vent panels.







3. Disconnect the windshield wiper mounting arm and pivot shaft.
1 Remove the access cover from the dash panel.
2 Remove the retaining clip.
3 Disconnect the windshield wiper mounting arm and pivot shaft from the windshield wiper motor.







4. Remove the windshield wiper mounting arm and pivot shaft.
1 Remove the screws.
2 Remove the windshield wiper mounting arm and pivot shaft.

INSTALLATION






1. To install, reverse the removal procedure.