Connecting Rod

DIMENSIONS
Alignment (Bore-to-Bore Max. Diff.):
Twist [1] + 1.27 mm (0.05 inch)
Bend + 0.038 mm (0.0014 inch)
Bore Diameter:
Crankshaft Bearing:
Windsor 56.866-56.886 mm
Romeo 56.756-58.876 mm
Piston Pin 22.012-22.024 mm (0.8665-0.8677 inch)
Length:
Center-to-Center 150.7 mm (5.93 inch)
Side Clearance (Assembled to Crank):
Standard 0.015-0.45 mm (0.0006-0.0177 inch)
Service Limit 0.50 mm (0.02 inch)

[1] Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline.-Twist mm (inch)