Brake Pedal Assy: Service and Repair

REMOVAL





1. Disconnect the brake master cylinder push rod.
1 Remove the self-locking pin.
2 Remove the brake master cylinder push rod spacer.
3 Separate the stoplight switch from the brake booster push rod.
4 Remove the brake master cylinder push rod bushing

Remove Brake Pedal Assembly:

2. Remove the one brake pedal bracket bolt and the four brake pedal bracket nuts and remove the brake pedal assembly.

CAUTION: Support the brake master cylinder and power brake booster In the engine compartment.

INSTALLATION

Install Brake Pedal Assembly:

1. Follow the removal procedure in reverse order.