Brake Rotor - Incorrect Discard Thickness Specification

Article No.
99-25-6

12/13/99

^ BRAKES - INCORRECT ROTOR THICKNESS
STAMPED ON ROTOR - F-150 4X2 ONLY

^ BRAKES - INCORRECT WORKSHOP MANUAL
ROTOR DISCARD THICKNESS SPECIFICATION

FORD:
1997-2000 EXPEDITION, F-150, F-250 LD

LINCOLN:
1998-2000 NAVIGATOR

ISSUE
The 1997-2000 Workshop Manuals do not provide the correct and complete specification for rotor discard thickness. Additionally, some 4X2 F-150 rotors may have an incorrect rotor discard thickness stamped on them.

Updated Information Per TSB 99-25-6:

ACTION
Refer to the Front and Rear Disc Rotor Discard Specification Charts for correct rotor discard specification.

* SOME 4X2 F-150 ROTORS SHOW "24.7 mm" PRINTED ON THE ROTOR BACK SIDE. THIS IS AN ERROR, THESE CAN BE CUT TO 24.5 mm DISCARD THICKNESS.

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 301000, 390000