Cowl Side-to-Door Opening Panel Leaks Service Procedure

Refer To Figure 5

1. Remove the left front tire.

2. Remove the inner fender splash shield from the left front fender. Refer to the appropriate Workshop Manual, Section 501-02, for details.

3. Remove the grille by referring to the Workshop Manual, Section 501-08.

4. Remove the left front fender by referring to the Workshop Manual, Section 501-02.

5. Test with water.

6. Apply seam sealer along the interface between the cowl and the dash panel. This area can be reached through the access hole located near the top hinge for the front door.

7. Reassemble in reverse order.

8. Apply paint protection to fender bolts.