Rear, 60% Portion of 60/40 Split Bench/Recline & Child Seat

REMOVAL







1. Remove the rear outboard nut and bolt.
2. Fold the rear seat down.







3. Fully extend the integrated child safety seat safety belts.
^ Use a shop towel and locking grips to keep the safety belt fully extended.







4. Remove the center occupant safety belt.
1 Remove the bolt.
2 Remove the center occupant safety belt.







5. Remove the safety belt buckle bracket to floor nuts.
6. Return the seat back to the upright position.







7. Remove the rear seat riser to floor nuts.

NOTE: Remove the plastic caps on the nuts.

8. Remove the rear seat.

INSTALLATION






















1. To install, reverse the removal procedure.