Camshaft, Engine

GENERAL SPECIFICATIONS
Intake Lobe Lift 6.92 mm (0.272 inch)
Exhaust Lobe Lift 6.92 mm (0.272 inch)
Maximum Allowable Lobe Lift Loss 0.127 mm (0.005 inch)
End Play 0.065-0.165 mm (0.025-0.064 inch)
Journal to Bearing Clearance 0.025-0.076 mm (0.001-0.003 inch)
Repair Limit 0.152 mm (0.006 inch)
No. 1 Journal Diameter 49.57-49.59 mm (1.951-1.952 inch)
No. 2 Journal Diameter 49.21-49.23 mm (1.937-1.938 inch)
No. 3 Journal Diameter 48.83-48.84 mm (1.9224-1.9228 inch)
No. 4 Journal Diameter 48.44-48.46 mm (1.907-1.9078 inch)
Maximum Camshaft Journal Runout 0.127 mm (0.005 inch)
No. 1 Bearing Inside Diameter 49.635-49.655 mm (1.954-1.955 inch)
No. 2 Bearing Inside Diameter 49.255-49.275 mm (1.939-1.940 inch)
No. 3 Bearing Inside Diameter 48.750-48.768 mm (1.919-1.920 inch)
No. 4 Bearing Inside Diameter 48.875-48.895 mm (1.924-1.925 inch)
Front Bearing Location Depth [2] 0.51-0.89 (0.020-0.035 inch)

[2] Distance in inches that the front edge of the bearing is installed below the front face of the cylinder block.