Trunk/Liftgate Sensor/Switch (For Alarm): Service and Repair

REMOVAL
1. Remove the liftgate trim panel.
2. Remove the watershield.







3. Remove the liftgate lock cylinder disarm switch.
1 Remove the "E" clip.
2 Remove the lock rod actuator.
3 Disconnect the electrical connector.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE:
- The liftgate lock cylinder disarm switch locator mark must be positioned towards the harness side of the switch prior to installation.
- Depress the liftgate lock cylinder to install the liftgate lock cylinder disarm switch.