Crankshaft Position Sensor: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.

CAUTION: Always disconnect the battery ground cable prior to any work on the electronic engine controls or damage to the electrical component may occur.







2. Remove the Crankshaft Position (CKP) sensor.
1 Disconnect the CKP sensor electrical connector.
2 Remove the screws.
3 Remove the CKP sensor.







INSTALLATION

NOTE: Be sure sensor wiring is routed away from the battery cable.

1. Install the CKP sensor.
1 Position the CKP sensor.
2 Install the screws.
3 Connect the CKP sensor electrical connector.
2. Connect the battery ground cable.