General Module: Service and Repair

REMOVAL







1. Disconnect the battery ground cable.

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

2. Remove the radio chassis.







3. Remove the center instrument panel finish panel.
1 Remove the rear wiper knob.
2 Remove the screws.
3 Remove the center instrument panel finish panel.







4. Remove the GEM/CTM.
1 Remove the screw.
2 Disconnect the four connectors from the GEM/CTM.
3 Remove the GEM/CTM.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.