Fore-and-Aft Adjustment

1. Open the sliding roof panel to the vent position.







2. Disconnect the LH and RH U-cover ends.







3. Remove the LH and RH side covers.







4. Loosen the sliding roof panel.
1 Remove the two center lifter arm bolts.
2 Loosen the four remaining lifter arm bolts.
3 Loosen the sliding roof panel.







5. Adjust the sliding roof panel.
1 Reposition the sliding roof panel.
2 Tighten the four lifter arm bolts.
3 Install the two center lifter arm bolts.







6. Install the LH and RH side covers.







7. Install the LH and RH U-cover ends.