60 Percent Portion W/Built-In Child Safety Seat
DISASSEMBLY1. Place the seat on a clean workbench.
2. Fully extend the integrated child safety seat safety belts.
^ Use a shop towel and locking grips to keep the safety belt fully extended.
3. Lock the seat into the upright position
4. Remove the recliner and latch handles.
1 Remove the screws.
2 Remove the recliner and latch handles.
NOTE: The wire cables in the seat back are not repairable. If they are damaged, the seat back frame must be replaced.
5. Remove the inboard pivot cover.
1 Remove the bolt.
2 Remove the inboard pivot cover.
6. Remove the outboard pivot cover.
7. Remove the inboard seat cushion pivot bolt.
8. Remove the outboard seat cushion pivot bolt.
9. Remove the seat cushion.
ASSEMBLY
1. Position the seat cushion.
2. Install the outboard pivot bolt.
3. Install the inboard pivot bolt.
4. Install the outboard pivot cover.
5. Install the inboard pivot cover.
1 Position the inboard pivot cover.
2 Install the bolt.
6. Install the recliner and latch handles.
1 Position the recliner and latch handles.
2 Install the screws.
7. Unlock the seat from the upright position.
8. Release the integrated child safety seat safety belts.
^ Remove the shop towel and locking grips from the safety belt.