Sensor, Engine Coolant Temperature (ECT)

REMOVAL
1. Disconnect the battery ground cable.
2. Partially drain the cooling system.







3. Remove the Engine Coolant Temperature (ECT) sensor.
1 Remove the ECT sensor electrical connector.
2 Remove the ECT sensor.







INSTALLATION
1. Install the ECT sensor.
- Install the ECT sensor.
- Connect the ECT electrical connector.

- Apply Ford Pipe Sealant with Teflon(TM) D8AZ-19551A or equivalent meeting Ford specifications WSK-M2G350-A2 and ESR-M18P7-A to the threads of the sender unit.

2. Fill the cooling system.
3. Connect the battery ground cable.