Crankshaft, Engine

GENERAL SPECIFICATIONS
Main Bearing Journal Diameter 56.980-57.0 mm (2.2433-2.2441 inch)
Main Bearing Journal Out-of-Round 0.015 mm (0.0006 inch)
Main Bearing Journal Runout TIR Maximum 0.0508 mm (0.002 inch)
Main Bearing Journal Runout Limit 0.127 mm (0.005 inch)
Main Bearing Thrust Face Runout TIR Maximum 0.0254 mm (0.001 inch)
Main Bearing Journal Taper Maximum Per Inch 0.008 mm (0.0003 per inch)
Thrust Bearing Journal Length 26.39-26.44 mm (1.039-1.041 inch)
Main and Rod Bearing Journal Finish Maximum 12 and 8.8 RMS
Main Bearing Thrust Face Finish Maximum 20 RMS
Connecting Rod Journal Diameter 53.98-54.0 mm (2.1252-2.1260 inch)
Connecting Rod Journal Maximum Out-of-Round 0.008 mm (0.0003 inch)
Connecting Rod Journal Taper Per Inch Maximum 0.008 mm (0.0003 per inch)
Crankshaft Free End Play 0.05-0.32 mm (0.002-0.0125 inch)