With 6-Way Power Seat (Except Limited)
DISASSEMBLY1. Disassemble the 6-way power front bucket seat.
2. Unhook the trim cover clip.
3. Remove the seat back trim to cushion listing wires.
1 Remove the hog rings.
2 Remove the seat back trim to cushion listing wires.
4. Disengage the hook and loop strips and pull the seat trim up to expose the lower row of hog rings.
^ Remove the hog rings.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the seat back foam.
5. Pull the seat trim up to expose the upper row of hog rings.
^ Remove the hog rings.
6. Remove the seat trim.
7. Remove the plastic bag.
8. Remove the seat back padding from the seat back frame.
1 Remove the J-hook.
2 Separate the seat back foam from the seat back frame.
NOTE: The seat back padding may be glued to the seat back frame.
3 Remove the seat back padding from the seat back frame.
9. Remove the front seat back latch.
1 Remove the bolts.
2 Remove the front seat back latch.
10. Remove the plastic bag from the top of the seat back frame.
11. Remove the front seat back pad adjuster.
1 Remove the wire retainer.
2 Remove the tube.
3 Unhook the pad wires from the frame.
4 Remove the front seat back pad adjuster.
ASSEMBLY
1. Install the front seat back pad adjuster.
1 Position the front seat back pad adjuster.
2 Hook the pad wires to the frame.
3 Install the tube.
4 Install a new wire retainer.
2. Install the plastic bag on the top of the seat back frame.
3. Install the front seat back latch.
1 Position the front seat back latch.
2 Install the bolts.
4. Install the seat back padding to the seat back frame.
1 Apply glue to the seat back padding where the side frames recess into the seat back padding.
2 Install the seat back frame into the seat back padding.
3 Install the J-hook.
5. Install the plastic bag over the seat back.
6. Pull the seat trim onto the first grove in the seat and install the upper row of hog rings.
7. Pull the seat trim to the second grove in the seat and install the lower row of hog rings.
8. Connect the hook and loop fastener to the seat trim.
1 Pull the seat trim completely down.
2 Reach up inside the seat and grab the plastic above the hook and loop. Remove enough plastic to expose the hook and loop.
9. Install the seat back trim to cushion listing wires.
1 Position the seat back trim and install the cushion listing wires.
2 Install the hog rings.
10. Hook the trim cover clip.
11. Assemble the 6-way power front bucket seat.