Crankshaft

GENERAL SPECIFICATIONS
Main Bearing Journal Diameter 57.105-57.125 mm (2.2482-2.2490 inch)
Main Bearing Journal
Out-Of-Round 0.015 mm (0.0006 inch)
Runout TIR Maximum 0.051 mm (0.002 inch)
Runout Service Limit 0.127 mm (0.005 inch)
Runout TIR Maximum 0.025 mm (0.001 inch)
Taper Maximum Per Inch 0.013 mm (0.0005 inch)
Thrust Bearing Journal Length 28.88-28.931 mm (1.137-1.139 inch)
Main and Rod Bearing Journal Finish Maximum 12 RMS
Main Bearing Thrust Face Finish Maximum 25 Front, 20 Rear RMS
Connecting Rod Journal
Diameter 53.919-53.939 mm (2.1228-2.1236 inch)
Maximum Out-of-Round 0.015 mm (0.0006 inch)
Taper Per Inch Maximum 0.015 mm (0.0006 inch)
Crankshaft Free End Play 0.102-0.203 mm (0.004-0.008 inch)
Crankshaft Free End Play Service Limit 0.127 mm (0.005 inch)