Instrument Cluster - Replacement

REMOVAL







1. Disconnect the battery ground cable.







2. Remove the center instrument panel finish panel.
1 Remove the rear wiper/washer switch knob.
2 Remove the screws.
3 Disconnect the connectors and remove the center instrument panel finish panel.







3. Remove the parking brake release handle.
1 Remove the screws.
2 Remove the parking brake release handle.







4. Remove the hood latch release handle.
1 Remove the screws.
2 Remove the hood latch release handle.







5. Remove the instrument panel steering column cover.
1 Remove the screws.
2 Remove the instrument panel steering column cover.







6. Remove the instrument panel steering column opening cover reinforcement.
1 Remove the four screws.
2 Remove the instrument panel steering column opening cover reinforcement.
7. If equipped, position the column gearshift lever aside.







8. Pull out the cluster finish panel.
1 Remove the screws.
2 Pull out the cluster finish panel.







9. Remove the cluster finish panel.
1 Disconnect the connectors.
2 Remove the cluster finish panel.







10. Remove the instrument cluster.
1 Remove the screws.
2 If equipped with an automatic transmission, remove the transmission range indicator and pull the cluster forward to disconnect the three electrical connectors on the back.
3 Remove the instrument cluster.

NOTE: Illustration shows steering column removed for clarity.

INSTALLATION

















1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.