Flow of Diagnosis
New Generation Star (NGS) Tester:
The symptom chart can be used to help locate the air bag Supplemental Restraint System (SRS) concerns if no Diagnostic Trouble Codes (DTCs) are retrieved and the listed symptoms are observed. Whether or not the listed symptoms are observed always perform the following.
1. Retrieve all DTCs stored in the air bag diagnostic monitor memory. Retrieving Diagnostic Trouble Codes
2. Run the On-Demand Self Test to determine what DTCs are currently being sensed by the air bag diagnostic monitor. Procedures
3. If the stored DTCs are different than the current DTCs, always repair the current DTCs first.
4. If memory displays different continuous DTCs than the On-Demand Self-Test, perform in the following order:
- On-Demand Self-Test.
- Memory (Retrieve/Clear Continuous DTCs).
A DTC can indicate several concerns. The DTCs are to assist in system diagnosis and are not to be considered definitive. Always refer to the pinpoint test corresponding to the DTC to determine where the concern lies and to repair the concern properly.
The SRS diagnostics can be divided into four sections.
- Retrieve/Clear Continuous DTCs
- On-Demand Self Test
- PID/data monitor and record
- Active command modes