Torque Specifications

TORQUE SPECIFICATIONS
Crankshaft Main Bearing Bolts (Cross Mounted)





Tighten the bolts in the sequence shown.





Tighten the jack screws in two stages, in the sequence shown.
- Stage 1: Tighten to 5 Nm (44.6 in. lbs.)
- Stage 2: Tighten to 9-11 Nm (80-97 in. lbs.)

Crankshaft Main Bearing Bolts (Vertical)





Install the bolts and tighten in two steps in the sequence shown.
- Step 1: Tighten to 10 Nm (89.2 in. lbs).
- Step 2: Tighten to 19-23 Nm (14-17 ft. lbs.).