Instrument Cluster - Replacement

REMOVAL
1. Remove headlamp switch.

CAUTION
- Prior to removal of module, it is necessary to upload module configuration information to New Generation STAR (NGS) Tester. This information needs to be downloaded into the new module once installed.
- Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.







2. Carefully release the four clips and remove the steering column opening cover.







3. Remove the instrument panel finish panel.
1 Remove the bolts.
2 Remove the instrument panel finish panel.







4. Remove the instrument cluster.
1 Remove the bolts.
2 Disconnect the electrical connectors.
3 Remove the instrument cluster.
- If equipped, remove the transmission range indicator.

INSTALLATION












1. To install, reverse the removal procedure.

CAUTION: Once the new module is installed, it is necessary to download the module configuration information from the New Generation STAR (NGS) Tester into the new module.