Operation CHARM: Car repair manuals for everyone.
Home >> Ford Truck >> 1998 >> F 150 4WD Pickup V8-5.4L SOHC VIN L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Service and Repair >> Air Cleaner Outlet

Air Cleaner Outlet

REMOVAL







1. Remove the air cleaner outlet tube.
1. Disconnect the engine control sensor extension wiring electrical connector.
2. Loosen the screw.
3. Separate the air cleaner outlet tube from the outlet engine Air Cleaner (ACL).







2. Open the air cleaner clamp and remove the outlet engine air cleaner.

INSTALLATION







1. Install the outlet engine air cleaner and secure the air cleaner clamp.

CAUTION: The air cleaner outlet tube should be securely sealed to prevent unmetered air from entering the engine.

NOTE: The inlet engine air cleaner has an alignment tab which fits into a slot on the outlet engine air cleaner. This ensures a good seal and keeps unmetered air from entering the engine.







2. Install the air cleaner outlet tube.
1. Install the air cleaner outlet tube into the outlet engine air cleaner.
2. Secure the screw.
3. Connect the engine control sensor extension wiring electrical connector.
pro multis · About Operation CHARM