Rear 8.8 Inch Ring Gear

GENERAL SPECIFICATIONS
Pinion Maximum Runout 0.25 mm (0.010 inch T.I.R.)


TORQUE SPECIFICATIONS
Differential Pinion Shaft Lock Bolt 20-40 Nm (15-30 ft. lbs.)
Pinion Bearing Preload (Used Pinion Bearings) 0.9-1.5 Nm (8-14 inch lbs.)
Pinion Bearing Preload (New Pinion Bearings) 1.8-3.3 Nm (16-29 inch lbs.)