Full Bench Seat, Front Center and RH Passenger

T55 "Torx Plus" Bit:

Special Tool(s)

REMOVAL





1. Remove the front center and RH passenger safety belt buckle ends.
1 Use T55 "Torx Plus" Bit to remove the buckle bolts.
2 Feed the buckle assembly up through the top of the seat cushion and remove the front seat safety belt buckles.
3 Feed the LH driver buckle and center passenger tongue assembly up through the top of the seat cushion and remove the front seat safety belt buckle/tongue assembly.

INSTALLATION





1. To install, reverse the removal procedure.
^ Check the restraint system for proper operation.