Function Test

1. After Auto Test, release and press the Super STAR II Tester button.
2. Wait at least 20 seconds.
3. Function Test codes 23 through 33 should be displayed, each for approximately 15 seconds. The codes will be repeated as long as the Super STAR II Tester button is in the TEST position.
4. Within four seconds of the function test code being displayed, press the Super STAR Test button to place it into the HOLD position to run the function test.

NOTE: As long as the Super STAR II Test button is in the HOLD position, the selected test will run. While a function test is running, the Super STAR II Tester display may change. Any change in the display will have no effect on the running test.

5. To stop the function test, press the Super STAR II Tester button to place it into the TEST position. The function test codes will start to cycle again.