Radio/Stereo: Service and Repair

Radio Removing Tool:

Special Tool(s)


REMOVAL

WARNING: USE ONLY PROPERLY INSTALLED FCC APPROVED RADIO TRANSMITTING EQUIPMENT. USE OF OTHER TRANSMITTING EQUIPMENT MAY CAUSE THE VEHICLE TO MALFUNCTION OR STALL. IF THE ENGINE STALLS, POWER BRAKE AND POWER STEERING ASSIST WILL STOP. CONSULT YOUR AUTHORIZED DEALER BEFORE INSTALLING ANY RADIO TRANSMITTER.

NOTE: The following removal and installation procedures apply to all original equipment instrument panel mounted radio chassis.







1. Disconnect the battery ground cable.







2. Use Radio Removing Tool to pull out the radio chassis.







3. Disconnect the (A) radio antenna lead in cable and the (B) radio wiring connectors.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.