Stabilizer Bar: Service and Repair

REMOVAL
1. Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

2. Remove the tire and wheel assembly.





3. Remove the front stabilizer bar link nut from the front suspension lower arms.





4. Remove the LH and RH front stabilizer bar bolts.





5. Remove the front stabilizer bar.
(1) Remove the four bolts.
(2) Remove the front stabilizer bar.
(3) Remove the lower suspension arm stabilizer bar insulators.

INSTALLATION








1. To install, reverse the removal procedure.
2. If equipped with air suspension, lower the vehicle and reactivate the system by turning on the air suspension switch.