Front

REMOVAL
1. With the vehicle in neutral, raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE REAR JACK STORAGE AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.





2. Remove the front driveshaft shield.
1 Remove the nuts.
2 Remove the front driveshaft shield.





3. Index-mark the front driveshaft flange yoke and the front axle companion flange.
^ Repeat on the transfer case companion flange to front driveshaft flange yoke.





4. Remove the four driveshaft flange yoke to transfer case bolts.





5. Remove the four driveshaft slip yoke to front drive axle companion flange bolts.





6. Remove the front driveshaft.

INSTALLATION











1. Follow the removal procedure in reverse order.