Transmission Position Sensor/Switch: Service and Repair

Special Tools:

REMOVAL
1. If equipped, turn the air suspension switch OFF.
2. Disconnect the battery ground cable.
3. Raise the vehicle on a hoist.





4. Disconnect the connector.





5. Disconnect the shift cable at the manual control lever.





6. Remove the digital Transmission Range (TR) sensor.
1 Remove the bolts.
2 Remove the digital TR sensor.

INSTALLATION





1. Install the digital Transmission Range (TR) sensor.
1 Install digital TR sensor.
2 Loosely install the bolts.





2. Install the Digital TR Sensor Alignment Tool.

NOTE: Make sure that the manual control lever is in the neutral position.





3. Tighten the bolts.





4. Reconnect the shift cable at the manual control lever.





5. Reconnect the connector.
6. Lower the vehicle.
7. Reconnect the battery ground cable.
8. If equipped with air suspension, reactivate the system by turning on the air suspension switch.