One Piece

REMOVAL
1. Remove the radio chassis.







2. Position the antenna lead in cable.
1 Open the glove box door.
2 Release the tabs and lower the glove box to the full open position.
3 Disconnect the antenna lead in cable wire clip.
4 Push the rubber grommet through the sheet metal and feed the antenna lead in cable through the hole.







3. Remove the radio antenna mast.
^ Remove the radio antenna mast by turning it counterclockwise.







4. Unsnap and remove the radio antenna base cap.







5. Remove the antenna base and lead in cable assembly.
1 Remove the screws.
2 Remove the antenna base and lead in cable assembly.

INSTALLATION












1. To install, reverse the removal procedure.