Two Piece

REMOVAL







1. Remove the radio antenna mast.
^ Remove the radio antenna mast by turning it counterclockwise.







2. Unsnap and remove the radio antenna base cap.







3. Remove the screws.







4. Position aside the antenna lead in cable.
1 Lift out the antenna base.
2 Disconnect the antenna lead in cable.
3 Push the rubber grommet through the sheet metal and feed the antenna lead in cable through the hole.
5. Remove the radio chassis.







6. Remove the antenna lead in cable.
1 Open the glove box door.
2 Release the tabs and lower the glove box to the full open position.
3 Unclip the antenna lead in cable wire clips.
4 Pull the antenna lead in cable through the hole and remove the remove the antenna lead in cable.

INSTALLATION












1. To install, reverse the removal procedure.