Keyless Entry: Description and Operation

The electronic door lock control system consists of the Remote Anti-theft Personality (RAP) module, and two three-button transmitters. The RAP module controls the door locks through the use of external relays located in the relay box, on the LH side of the lower instrument panel. The RAP module also controls the anti-theft system.

Keyless entry remote transmitters are programmable. All transmitters for the vehicle must be set at the same time. When troubleshooting the system, both transmitters are needed to perform the pinpoint tests.

To unlock the driver door and disarm the anti-theft system, press the unlock button on the keyless entry remote transmitter one time. To unlock both doors, press the unlock button a second time within five seconds.

To lock all doors and arm the anti-theft system, press the lock button on the keyless entry remote transmitter one time. To confirm that the doors have locked and the anti-theft system has armed, press the lock button a second time within five seconds. The horn will chirp once to notify that all doors are closed and locked and the alarm is armed. The horn will chirp twice if any door is still ajar.

NOTE: The remote entry features will not function when the key is in the RUN or ACC position.

To activate the panic alarm, press the red panic button on either transmitter. The horn will sound and the parking lamps will flash for a maximum of three minutes.

To deactivate the panic alarm, press the red panic button again or turn the ignition to the ON position.