On-Board Diagnostics With NGS

NOTE: For detailed instructions and other diagnostic methods using the New Generation Star (NGS), refer to the NGS tester manual.

These quick tests should be used to diagnose the powertrain control module (PCM) and should be performed in order.
- Quick Test 1.0 - Visual Inspection
- Quick Test 2.0 - Set Up
- Quick Test 3.0 - Key On, Engine Off
- Quick Test 4.0 - Continuous Memory
- Quick Test 5.0 - Key On, Engine Running
- Special Test Mode
- Wiggle Test Mode
- Output Test Mode
- PCM Reset Mode
- Clearing DTCs
- OBD 11 Drive Cycle
- Other NGS Features

For further information on other diagnostic testing features using the NGS or generic scan tool, refer to Powertrain Management. Other diagnostic methods include the following:
- Parameter Identification (PID) Access Mode
- Freeze Frame Data Access Mode
- Oxygen Sensor Monitor Mode