Piston Ring, Engine

Ring Width 1.46-1.490 mm
Compression (Top) (0.058-0.059 In.)
Compression (Bottom) (0.058-0.059 In.)
Side Clearance 0.035-0.076 mm
Compression (Top) (0.0014-0.0030 In.) 0.035-0.076 mm
Compression (Bottom) (0.0014-0.0030 In.)
Oil Ring Snug Fit
Service Limit 0.15 mm (0.006 In.) Max.
Ring Gap (measure in bore) 0.20-0.47 mm
Compression (Top) (0.008-0.018 In.) 0.32-0.59 mm
Compression (Bottom) (0.013-0.023 In.) 0.25-0.88 mm
Oil (Steel Rail) (0.010-0.035 In.)

NOTE:
- Measure on skirt 40 mm (1.57 in) down from face of piston dome
- Use bore measurement perpendicular to crank centerline