Component Tests and General Diagnostics

NOTE: To enter the Speaker Walk-Around Test or Audio Control Module (ACM) self-diagnostic mode, the ACM must be turned on, and in radio tuner mode (AM/FM)

1. To enter the Speaker Walk-Around Test, simultaneously press the ACM Preset Buttons 3 and 6 (1 and 4 for ULC only).
2. The Speaker Walk-Around Test stops at each speaker and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the ACM in the following sequence: RF, LF, LR, RR.
3. The speaker walk-around test automatically continues and tests Antenna, Subwoofer I and Subwoofer II, for speaker short and CD/DJ (P100i only). If a speaker short exists, SPKR SHORT will be displayed. If the vehicle is not equipped with CD/DJ or if the CD/DJ is not responding, NO DJ (P100i only) will be displayed.