4R100

Special Tools:

Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.





3. Disconnect the connector.





4. Disconnect the shift cable at the manual control lever.





5. Remove the digital transmission range (TR) sensor.
1 Remove the bolts.
2 Remove the sensor.

Installation





1. Install the digital transmission range (TR) sensor.
1 Install the sensor.
2 Loosely install the bolts.

2. NOTE: Make sure that the manual control lever is in the neutral position.





Install the TRS Alignment Tool. The tool is designed to fit snug.





3. Tighten the bolts.





4. Reconnect the shift cable at the manual control lever.





5. Reconnect the connector.
6. Reconnect the.