Rear Quad Bucket Seat

REMOVAL







1. Disengage the detachable safety belt anchor.
1 Insert a key or small screwdriver into the slot in the detachable anchor and lift upward.
2 Disengage the detachable anchor tongue end from the detachable anchor.







2. Pull the handle to release the rear bucket seat from the pedestal.







3. Slide the seat toward the right-hand side of the vehicle.
4. Remove the rear bucket seat.

INSTALLATION
1. Position the rear bucket seat in the vehicle.







2. From the passenger side, insert the four pins in the seat support into the four holes in the seat striker.







3. Rotate the handle downward and in as far as it will go, to lock the rear bucket seat in place.
4. Make sure the safety belt is not twisted, then insert the safety belt tongue into the detachable anchor until you hear a "click" and feel the latch engage.