Fuel Injector: Service and Repair

REMOVAL
1. Remove the fuel supply manifold.







2. Remove the fuel injectors from the fuel supply manifold.







3. Remove and discard the two O-rings from each fuel injector.

INSTALLATION







1. To install, reverse the removal procedure.

CAUTION: Use O-rings that are made of special fuel-resistant material. Use of ordinary O-rings can cause the fuel system to leak.

NOTE: Lubricate the new O-rings with clean engine oil, XO-10W30-QSP or DSP or equivalent meeting Ford specification WSS-M2C153-G, to aid installation.