Low One-Way Clutch Assembly

Low/Reverse One-Way Clutch Assembly and Piston, Disassembled View - 1 Of 2:

Low/Reverse One-Way Clutch Assembly and Piston, Disassembled View - 2 Of 2:

Low/Reverse One-Way Clutch Assembly and Piston, Disassembled View

Disassembly





1. Remove the output shaft ring gear and the No. 12 thrust bearing.
1 Remove the ring gear.
2 Remove the bearing.





2. If necessary, remove the low one-way clutch (17 roller) assembly by rotating it counterclockwise to unlock the tabs.
3. Inspect the following:
^ Reverse clutch hub thrust surfaces for scores.
^ Reverse clutch hub splines for wear.
^ Outer and inner low/reverse one-way clutch race for scores and damaged surface areas where rollers contact races.
^ Rollers and springs for excessive wear or damage.
^ Spring and cage.

Assembly
1. Follow the removal procedure in reverse order.