Remote Control, Audio - Stereo

Heavy Duty Riveter:

Special Tool(s)

REMOVAL
1. Remove the rear door trim panel.







2. Remove the rear door radio speaker.
1. Remove the screws.
2. Disconnect the electrical connector.
3. Remove the rear door radio speaker.







3. Carefully peel off the rear door watershield.







4. Disconnect the necessary rods and cables from the rear door latch remote control.







5. Remove the rear door latch remote control.
1. Drill out the rivets.
2. Remove the rear door latch remote control.

INSTALLATION






1. To install, reverse the removal procedure.
^ Using Heavy Duty Riveter, install the rivets.

NOTE: Make sure the rear door latch remote control rods are not preloading the latch. They should be clipped in a relaxed state with no slack.